Replacing The Battery - Husqvarna 105 Operator's Manual

Replacing the battery

If the operating times for the mower are shorter than
normal between charges, this indicates that the battery
is getting old and eventually needs replacing. The
battery is fine as long as the mower maintains a
well-cut lawn.
IMPORTANT INFORMATION
Only use Husqvarna Group AB original batteries.
Compatibility with other batteries cannot be
guaranteed.
IMPORTANT INFORMATION
The appliance must be disconnected from the
supply mains when removing the battery.
1. Set the main switch in position 0.
2. Turn the mower upside down.
3. Clean around the battery cover.
4. Unscrew the four screws to the battery cover
(Torx 20) and remove the battery cover.
5. Pull out the battery by pulling on the strap.
6. Set the main switch in position 0.
7. Turn the mower upside down.
8. Fit a new Husqvarna original battery. NOTE!
Press on the contact strip to fit the battery in
place.
9. Fit the battery cover. The sealing strip is
reusable and does not have to be replaced.
10. Screw in place the four screws for the battery
cover (Torx 20).
66 - English
8. MAINTENANCE
3020-044
3020-044
3020-045
3020-045