You can select a method to configure the Wireless Connection from the following:
•
Wizard Setup through Dell Printer Easy Install
*1*3
•
WPS-PBC
*2*3
•
WPS-PIN
•
Auto SSID Setup
•
Manual SSID Setup
•
Dell Printer Configuration Web Tool
*1 WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required for wireless
configuration, by pressing the button provided on the access point via wireless routers, and then performing WPS-PBC setting on the
operator panel. This setting is available only when the access point supports WPS.
*2 WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices required for wire-
less configuration, by entering PIN assignments in the printer and computer. This setting, performed through access point, is available
only when the access points of your wireless router supports WPS.
*3 WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed mode PSK, WPA-PSK AES, WPA2-
PSK AES, WPA-PSK TKIP, Open (No Security)
NOTE:
If
Panel Lock Control
menu.
Settings
NOTE:
For details about using WPA-Enterprise-AES or WPA2-Enterprise-AES, see "Using Digital Certificates."
Configuring the Wireless Settings Using Dell Printer Easy Install
Software and Documentation disc provided with the printer into your computer. The Dell Printer Easy
1 Insert the
Install program launches automatically.
2 Click Main Menu.
72
Connecting and Setting Up Your Printer
is set to
, you need to enter the four-digit password to enter the
Enable
Admin