Philips Marathon FC9219 - FC9200 User Manual page 10

Philips marathon user manual
Hide thumbs Also See for Marathon FC9219 - FC9200:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
English
10

Reattach the top of the filter grille and push the bottom corners until they snap home
('click') (Fig. 28).
super Clean air HePa 12 filter
The Super Clean Air HEPA 12 filter is able to remove 99.5% of all particles down to 0.0003mm in
size from the outlet air. This not only includes normal house dust, but also harmful microscopic
vermin such as dust mites and their excrements, which are well-known causes of respiratory
allergies.
Replace the Super Clean Air HEPA 12 filter every six months. This filter is not washable.
To replace the Super Clean Air HEPA 12 filter, follow steps 1-4 of section 'Super Clean Air filter'
above.
Washable ultra Clean air HePa 13 filter
The Ultra Clean Air HEPA 13 filter is able to remove 99.95% of all particles down to 0.0003mm in
size from the outlet air. This not only includes normal house dust, but also harmful microscopic
vermin such as dust mites and their excrements, which are well-known causes of respiratory
allergies.
Clean the washable Ultra Clean Air HEPA 13 filter every 6 months. You can clean the washable
Ultra Clean Air HEPA 13 filter max. 4 times. Replace the filter after it has been cleaned 4 times.
1
Remove the filter grille (Fig. 29).
2
Take out the washable HEPA 13 filter (Fig. 30).

Rinse the pleated side of the HEPA 13 filter under a hot slow-running tap.
-
Hold the filter in such a way that the pleated side points upwards and the water flows parallel
to the pleats. Hold the filter at an angle so that the water washes away the dirt inside the
pleats (Fig. 31).
-
Turn the filter 180° and let the water flow along the pleats in opposite direction (Fig. 32).
-
Continue this process until the filter is clean.
Never clean the washable filter with a brush (Fig. 33).
Note:   Cleaning does not restore the original colour of the filter,   but does restore its filtration power.

Carefully shake the water from the surface of the filter. Let the filter dry at least 2 hours
before you put it back into the vacuum cleaner.
5
Put the filter back into the appliance. Reattach the top of the filter grille and push the bottom
corners until they snap home ('click') (Fig. 34).
Ordering accessories
If you have any difficulties obtaining filters or other accessories for this appliance, please contact the
Philips Customer Care Centre in your country or consult the worldwide guarantee leaflet.
-
Philips filter cylinders are available under service number 4322 005 17520.
-
Super Clean Air filters are available under type number FC8030.
-
Non-washable Super Clean Air HEPA 12 filters are available under type number FC8031.
-
Washable Ultra Clean Air HEPA 13 filters are available under type number FC8038.
environment
-
Do not throw the appliance away with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment (Fig. 35).
4222.003.3090.4.indd 10
22-11-2007 10:20:08

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

70fc920Marathon fc9200

Table of Contents