Can't Use The Photo Thumbnail Function - HP mp200 User Manual

Can't use the Photo thumbnail function

Check the tab at the top of the screen. The thumbnail view can only be used when
the "Photo" tab is selected. Also, make sure that the folder you are browsing contains
photo files, and then press the yellow button on the remote control to enable thumbnail
view.
If browsing photos via UPnP, the thumbnail view is not supported, instead use the
"Network" function of the mp200 to browse the photos using thumbnail view.
Can't see subtitle through uPnP playback
Most UPnP media servers do not support subtitles. Please retry using the "Network"
function of the mp200 to play videos with a subtitle file.
Smooth playback through ethernet/wireless lan
For an Ethernet connection, check to make sure your equipment is capable of at least a
100 Mbps performance.
For a wireless connection, we recommend using Infrastructure (AP) mode. We also
recommend that you either have "NO" encryption or use "WPA/WPA2-PSK_AES"
encryption. The use of other security modes (such as WEP or TKIP algorithms), slows
down the wireless connection performance.
tv overscan issue
Some video can't be watched as a full frame on your TV. The edges on both sides may
be outside of the TV screen. In this case, press the Zoom "-" button on the remote
control to zoom out the video to fit the screen.
error message displayed while playing dvd-video
If you see an error message when playing DVD-Video through a USB DVD-ROM
connected to the mp200, you may be playing a CSS-protected original DVD-Video. The
mp200 is not capable of playing CSS-protected DVD-Video. Please try to play a different
DVD-Video.
71