1.4.7 DISA (Direct Inward System Access)
1.9.12 Intercept Routing—No Destination
Description
Directs a CO line call to an operator when the call has no assigned destination.
Conditions
•
Intercept Routing—No Destination on/off
Intercept Routing—No Destination can be enabled or disabled for the entire system, through system
programming. If disabled, the caller will hear a reorder tone.
Note that calls received through an ELCOT/LCOT or T1 (LCOT/GCOT) card will always be directed to
an operator, even when this feature is disabled.
•
If an operator is not assigned:
The default intercept destination will be the extension connected to the lowest numbered port, on the
card installed in the lowest numbered slot.
•
Intercept Routing—No Destination also applies to calls from doorphones.
Programming References
PC Programming Manual
2.8.3 [2-2] Operator & BGM—PBX Operator—Day, Lunch, Break, Night
2.16.6 [10-4] Miscellaneous—Intercept—Routing to Operator - No Destination (Destination is not
programmed)
PT Programming Manual
[006] Operator Assignment
Feature Manual References
1.12.5 Operator Features
1.9.13 Intercom Call
Description
An extension user can call another extension user.
Conditions
•
Extension Number/Name Assignment
Extension numbers and names are assigned to all extensions. The assigned number and name of the
other extension are shown on display PTs during intercom calls.
•
DSS Button
It is possible to call another extension by simply pressing the corresponding Direct Station Selection
(DSS) button. Any flexible button can be customized as a DSS button.
1.9 I
Feature Manual
161