Page 2
Information in this document is subject to change without notice. Reproduction in any manner whatsoever, without the written permission of D-Link Corporation, is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.
Typographical Conventions Notes, Notices, and Cautions Safety Instructions The DGS-3710 Series Hardware Installation Guide contains information about the hardware specifcations of the Switch. This manual is intended for network managers familiar with network management concepts and terminology. Typographical Conventions Convention Description In a command line, square brackets indicate an optional entry.
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Safety Instructions Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage. Throughout this safety section, the caution icon ( ) is used to indicate cautions and precautions that need to be reviewed and followed.
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide • Observe extension cable and power strip ratings. Make sure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip.
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide CAUTION: Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if uncertain that suitable grounding is available.
This manual describes the installation, maintenance, and configurations concerning the Switch. Switch Description D-Link's DGS-3710 Series switch is a high performance member of the D-Link switch family. Ranging from 10/100Mbps edge switches to core gigabit switches, the switch family has been future-proof designed to provide fault...
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Features The list of features below highlights the significant features of the Switch. • IEEE 802.3 compliant • IEEE 802.3z compliant • IEEE 802.3x Flow Control in full-duplex compliant •...
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide LED Indicators The DGS-3710 Series switch’s front panel presents LED indicators for Power (PWR), System (SYS), Alarm (ALM), FAN, Management (MGMT), and Link/Act indicators for all ports including the Gigabit Ethernet ports.
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Rear Panel Description The rear panel of the Switch has no input, output, or display components. Figure 1–3 Rear panel view of a DGS-3710-12C Switch Side Panel Description The system heat vents located on each side dissipate heat. Do not block these openings. Leave at least 6 inches of space at the rear and sides of the Switch for proper ventilation.
One DC male connector, used for connecting to the DC female power input, which is located on the front panel. • One Alarm port cable. If any item is missing or damaged, please contact your local D-Link Reseller for replacement. Installation Guidelines Please follow these guidelines for setting up the Switch: •...
Allow enough ventilation space between the Switch and any other objects in the vicinity. Figure 2–1 Preparing a DGS-3710 Series Switch for installation on a desktop or shelf Attaching Brackets to a Switch for Rack Mounting The Switch can be mounted in a standard 19"...
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Mounting the Switch in a Standard 19" Rack Figure 2–3 Installing a DGS-3710 Series Switch in a rack Fan Modules – Installing and Removing The Switch is equipt with two removable modules. On the one side we find a fan module and on the other side we find a dust filter module.
Connect to DC Power Plug The DGS-3710 Series Switch supports a unique Dual Power Input feature. Next to the AC Power plug we find a DC power plug. Here the user can connect a -48V DC power source that will be activated when the AC power is not working.
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Figure 2–6 Connecting a Switch to the DC Power source NOTE: Use a minimum 18 gauge (AWG) wire. All power connection wiring should conform to the rules and regulations in the National Electrical Code (NEC), as well as any local codes. A branch circuit over current protection must be rated below 20A.
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Installing SFP Ports The Switch is equipped with SFP (Small Form Factor Portable) ports, which are to be used with fiber-optical transceiver cabling in order to uplink various other networking devices for a gigabit link that may span great distances.
1000BASE-T ports of the Switch. The Link/Act LEDs for each Ethernet port will light green or amber when the link is valid. A blinking LED indicates packet activity on that port. Figure 2–9 Connecting a DGS-3710 Series Switch to an end node Switch to Switch There is a great deal of flexibility on how connections are made using the appropriate cabling.
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Figure 2–10 Connecting a DGS-3710 Series Switch to another switch Connecting To Network Backbone or Server The combo SFP ports and the 1000BASE-T ports are ideal for uplinking to a network backbone, server or server farm.
Connecting the Console Port The front panel of the DGS-3710 Series switch provides a port that enables a connection to a computer monitoring and configuring the Switch. The console port is a DB-9 port and requires a special cable that is included with the switch, to establish the physical connection.
Enter the commands to complete desired tasks. Many commands require administrator-level access privileges. Read the next section for more information on setting up user accounts. See the DGS-3710 Series CLI Manual on the documentation CD for a list of all commands and additional information on using the CLI.
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide DGS-3710-12C Gigabit Ethernet Switch Command Line Interface Firmware: Build 1.00.029 Copyright(C) 2012 D-Link Corporation. All rights reserved. UserName:admin PassWord:**** DGS-3710-12C:admin# Figure 3–2 Initial screen, first time connecting to the Switch Input the username and password and press Enter on both occasions.
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide To change settings for the out-of-band Management port in the web interface, use the following path: Management > Out of Band Management Settings Password Protection After the initial login, define new passwords for both default user names to prevent unauthorized access to the Switch, and record the passwords for future reference.
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide The Switch supports SNMP versions 1, 2c, and 3. The administrator may specify which version of SNMP to use to monitor and control the Switch. The three versions of SNMP vary in the level of security provided between the management station and the network device.
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Chapter 4 Web-based Switch Configuration Introduction Logging onto the Web Manager Web-based User Interface Introduction All software functions of the Switch can be managed, configured, and monitored via the embedded web-based (HTML) interface.
Switch's ports and expansion modules and shows port activity, depending on the specified mode. Some management functions, including port monitoring are accessible here. Click the D-Link logo to go to the D-Link Website. AREA 3 Presents Switch status based on user selection and the entry of configuration data. In addition, hyperlinks are offered for many Switch features to enable quick configuration.
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Weight 3.25kg CE Class A, FCC Class A, C-Tick Report, IC Report, BSMI. Safety UL, CB Report, CE LVD Report. Green • Comply with RoHS 6. • All Gigabit ports support power saving, by Link Status and Energy Efficiency Ethernet (EEE) known as IEEE 802.3az.
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide LED Per Link/Act/Speed Green/Amber Solid Green When there is a secure 1000Mbps connection 10/100/1000 (or link) at any of the ports. Mbps Port Blinking When there is reception or transmission (i.e.
DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Appendix B – Cables and Connectors Ethernet Cable When connecting the Switch to another switch, a bridge or hub, a normal cable is necessary. Please review these products for matching cable pin assignment. The following diagrams and tables show the standard RJ-45 receptacle/connector and their pin assignments.
The customer's sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D -Link’s opti on, to replace t he non -conforming S oftware (or defec tive m edia) with s oftware that s ubstantially c onforms t o D-Link’s func tional specifications for the S oftware or to refund the po rtion of the ac tual purchase price paid that i s attributable to the S oftware.
Page 35
THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK H AS BEEN AD VISED O F T HE PO SSIBILITY OF S UCH DA MAGES. T HE S OLE RE MEDY F OR A B REACH O F T HE F OREGOING LIM ITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT.
Product Registration Register your D-Link product online at http://support.dlink.com/register/ Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
You can find software updates and user documentation on the D- Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the service period, and warranty confirmation service, during the warranty period on this product.
Page 38
Technical Support United Kingdom (Mon-Fri) Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm) Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am – 05.30pm) (BT 10ppm, other carriers may vary.) Ireland (Mon-Fri) All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm) €0.05ppm peak, €0.045ppm off peak Times Internet http://dlink.com...
Assistance technique Assistance technique D-Link sur internet : http://dlink.com Assistance technique D-Link par téléphone : 01 76 54 84 17 Du lundi au vendredi de 9h à 19h (hors jours fériés) Asistencia Técnica Asistencia Técnica Telefónica de D-Link: +34 902 30 45 45 0,067 €/min...
Pomoc techniczna Telefoniczna pomoc techniczna firmy D-Link: 0 801 022 021 Pomoc techniczna firmy D-Link świadczona przez Internet: http://dlink.com Technická podpora Web: http://dlink.com E-mail: support@dlink.cz Telefon ČR: +420 211 151 640 nebo SK: +421 (0)692 147 110 Telefonická podpora je v provozu: PO - PÁ od 09:00 do 17:00 Volání...
Page 41
Internetin kautta : http://dlink.com Arkisin klo. 09:00 - 18: 00 Numerosta : 0200-555 57 Teknisk Support D-Link Teknisk Support via Internet: http://dlink.com D-Link Teknisk Support via telefon: 0770-33 00 35 Vardagar 08:00 - 17:00 Assistência Técnica Assistência Técnica da D-Link na Internet: http://dlink.com e-mail: soporte@dlink.es...
Page 42
D-Link - ovo spletno stran www.dlink.eu http://dlink.com Suport tehnic Vă mulţumim pentru alegerea produselor D-Link. Pentru mai multe informaţii, suport şi manuale ale produselor vă rugăm să vizitaţi site-ul D-Link www.dlink.eu http://dlink.com...
Page 43
Technical Support You can find software updates and user documentation on t he D-Link website. Tech Support for customers in Australia: D-Link Middle East - Dubai, U.A.E. Tel: 1300-766-868 Plot No. S31102, 24/7 Technical Support Jebel Ali Free Zone South, Web: http://www.dlink.com.au...
Page 44
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Iran Israel Unit 5, 5th Floor, No. 20, 17th Alley , Bokharest המגשימים רח St. , Argentine Sq. , 49348 ת...
Page 45
Техническая поддержка Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка D-Link: 8-800-700-5465 Техническая поддержка через Интернет: http://www.dlink.ru...
Page 46
SOPORTE TÉCNICO Usted puede encontrar actualizaciones de softwares o firmwares y documentación para usuarios a través de nuestro sitio www.dlinkla.com SOPORTE TÉCNICO PARA USUARIOS EN LATINO AMERICA Soporte técnico a través de los siguientes teléfonos de D-Link PAIS NUMERO Argentina...
Page 47
Suporte Técnico Caso tenha dúvidas na instalação do produto, entre em contato com o Suporte Técnico D-Link. Acesse o site: www.dlink.com.br/suporte...
Page 49
Dukungan Teknis Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Dukungan Teknis D-Link melalui telepon: Tel: +62-21-5731610 Dukungan Teknis D-Link melalui Internet: Email : support@dlink.co.id Website : http://support.dlink.co.id...
Page 50
Technical Support この度は弊社製品をお買い上げいただき、誠にありがとうご ざいます。 下記弊社 Web サイトからユーザ登録及び新製品登録を 行っていただき、ダウンロードサービスにて サポート情報、ファームウェア、ユーザマニュアルを ダウンロードすることができます。 ディーリンクジャパン Web サイト URL:http://www.dlink-jp.com...
8. What category best describes your company? Aerospace Engineering Education Finance Hospital Legal Insurance/Real Estate Manufacturing Retail/Chain store/Wholesale Government Transportation/Utilities/Communication System house/company Other________________________________ 9. Would you recommend your D-Link product to a friend? Don't know yet 10.Your comments on this product? __________________________________________________________________________________________ __________________________________________________________________________________________...