Adding Of Rinse Aid - Kenwood KDW1274W User Manual

adding of rinse aid

Rinse aid helps to ensure water does
not cling and leave marks on crock-
ery during the drying phase and helps
crockery dry faster after it has been
washed. Only pour rinse aid that is for
domestic dishwashers into the res-
ervoir. This model is designed to use
liquid rinse aids only.
Please follow the steps below to pour
the rinse aid into the storage reservoir,
and the amount will dispense automati-
cally.
1. Turn the cap and open as indicated
in Fig 1.
2. When the cap open marking is
aligned (Fig 2a), you may lift the
cap up (Fig 2b).
3. Pour the rinse aid until the level
indicator turns completely black in
colour and close the cap. (Fig 3)
. Be careful not to overfill the reser-
voir. Wipe up any spills. The ap-
proximate volume of the rinse aid
reservoir is 110ml.
NOTE: If the water hardness in your area is soft, you may not need rinse aid
as it may cause white film to develop on your dishes.
Rinse aid indicator light on the display window will
illuminate when the reservoir is running out of rinse aid
and required re-filling.
Alternatively, you can judge the amount of rinse aid by checking the rinse
aid indicator right next to the reservoir's cap. When the indicator is black, it
means it is full. When it is clear, it means it is almost empty.
GB-18
rinse aid indicator
2a
rinse aid indicator on the display window
1
open
2b
3