Technical Problems; General Problems - Kenwood KDW1274W User Manual

technical problems

Technical problems
Problem
The dishwasher does
not start.
The drain pump is not
working properly.

General problems

Problem
Detergent residue is
left in the dispenser at
the end of the pro-
gramme.
The detergent dis-
penser lid cannot be
closed properly.
Knocking noise in the
wash cabinet.
Smearing appears on
glassware and cutlery.
Possible Causes
The door is not prop-
erly closed.
The unit is not con-
nected to the mains.
The unit is not
switched on.
Fault code E - The
anti-flooding system
has operated.
Possible Causes
The detergent dis-
penser was still damp
when detergent was
added.
Clogged detergent
residue is blocking the
catch.
A spray arms is knock-
ing against an item in a
basket.
The rinse aid dosage
is set too high.
Remedy
Close the door firmly.
Insert the plug to the
mains.
Press the "on" button
and select a pro-
gramme.
• Disconnect from
the mains.
• Disconnect the
water inlet.
• Call a qualified
technician.
Remedy
Make sure the dis-
penser is dry before
adding detergent.
Clean the catch.
Interrupt the pro-
gramme, and rear-
range the items which
are obstructing the
spray arm. See the
section "loading the
diswasher".
Adjust the dial of the
rinse aid dispenser to
a lower setting.
GB-33