HP 250 G5 Maintenance And Service Manual page 72

Description
● Intel Core i5-5005U processor and 2 GB of discrete graphics memory
For use in HP 250/256 G5 Notebook PC models (UMA graphics memory; non-touch screen):
● Intel Core i7-6500U processor
● Intel Core i5-6200U processor
● Intel Core i5-5005U processor
Intel Pentium N3710 processor
●
● Intel Pentium N3060 processor
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
7. Remove the WLAN module (see
8. Remove the memory module (see
9. Remove the solid-state drive (see
To remove the system board:
1. Position the computer upright, and then disconnect the following cables from the system board:
(1): Keyboard cable
(2): Optical drive connector cable
(3): Hard drive cable
(4): USB board cable
(5): TouchPad button board cable
(6): Speaker cable
(7): Fan cable
(8): Power button board cable
(9): Display cable
(10): Power connector cable
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 38).
Optical drive on page
Bottom cover on page
WLAN module on page
Memory module on page
Solid-state drive (SSD) on page
39), if installed.
42).
44).
46).
55).
Spare part number
858582-xx1
858579-xx1
858581-xx1
858583-xx1
858584-xx1
858585-xx1