Smartphone Connect Setup Guide
5.
Enter the password required to access the wireless network and
then press
[OK].
6.
Wait for the base unit to connect to your wireless router. When
"Connected to" and your wireless router's SSID are
displayed, press
[OFF]
to finish.
Simplified configuration (WPS, DHCP)
Password
*********
Wi-Fi settin s
Connected to
*********
This procedure requires a wireless router that supports WPS. If your wireless router supports
WPS, make sure the feature is turned on, and locate its WPS button before beginning this
procedure. The WPS button is typically labeled "WPS" or has two curved arrows on it.
Program this setting using either the base unit or one of the handsets. (Fewer operations are
I
.
needed when using the base unit.)
1.
Press the WPS button on your wireless router.
2.
Press and hold
[Wi-Fi SETUP]
button on the base unit for about
5 seconds and then wait for a long beep to sound.
[Wi-Fi SETUP]
1.
Using one of the handsets supplied with your phone system,
press
[Menu]
(right soft key) and then press
[!][§]0000.
2.
Press
[!]
or ['] to select ''WPS (Easy setting)" and then
press
[Select].
3.
Press the WPS button on your wireless router and then press
[OK]
on the handset.
Press [WPS] button
on your router
3