•
If the destination of a sensor call has set FWD, the sensor call will be redirected to the FWD destination.
However, if the FWD destination is not supported as the destination of a sensor call (e.g., an outside
party), the call will be received at the original destination. (→ 1.3.1.2 Call Forwarding (FWD))
•
The following features cannot be used when a sensor call is received:
–
Alternate Receiving—Voice (→ 1.5.3 Intercom Call)
–
Hands-free Answerback (→ 1.4.1.4 Hands-free Answerback)
–
Consultation Hold/Call Hold (→ 1.12.1 Call Hold)
–
Call Transfer (→ 1.11.1 Call Transfer)
–
Executive Busy Override (→ 1.7.2 Executive Busy Override)
•
Sensor call information is output on SMDR.
Installation Manual References
KX-TDA30
2.5.1 DPH4 Card
2.5.2 DPH2 Card
2.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
KX-TDA100/KX-TDA200
2.6.1 OPB3 Card (KX-TDA0190)
2.6.4 EIO4 Card (KX-TDA0164)
2.10.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
KX-TDA600
2.8.1 OPB3 Card (KX-TDA0190)
2.8.4 EIO4 Card (KX-TDA0164)
2.12.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
PT Programming Manual References
None
1.16 Optional Device Features
Feature Guide
185