Panasonic KX-TDA30 Features Manual page 326

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA30:
Table of Contents

Advertisement

1.29 Networking Features
[Trunk Call to an Extension Not Answered, Forwarded to Mailbox]
PBX-1
Mailbox 101
Extn.
Mailbox 201
101
Mailbox 202
VPS
[Explanation]
Extension 201 does not answer the outside call, so the call is forwarded to the VPS, and answered by
mailbox 201. If the outside caller leaves a message, the VPS sends a Message Waiting notification to the
extension using Enhanced QSIG information over the private network.
When forwarding the call, PBX-2 sends any received call information (Caller ID number/name, DDI number)
along with the VM trunk group number to use, applicable time mode, and extension number and forwarding
reason of the original destination extension to PBX-1 as Enhanced QSIG information.
Multiple VPSs
More than one PBX in the network can have a VPS connected, and each VPS can provide voice mail
services for extensions connected to other PBXs in the network.
Conditions
Hardware Requirement
The KX-TDA6920, KX-TDA0920 or KX-TDA3920 SD Memory Card for Software Upgrade to Enhanced
Version must be installed in the PBX connected to the VPS, and in all PBXs that will use this feature.
All PBXs in the network must be TDA-series PBXs.
Only KX-TVA/KX-TVM series VPSs connected using DPT integration support this feature.
Only extension numbers of 4 digits or less, using the Extension Number Method, are supported. (→
1.29.1 TIE Line Service)
Mailboxes for extensions connected to other PBXs in the network must be set up manually.
An extension can receive Message Waiting notifications from multiple VPSs connected to PBXs in the
network. When multiple notifications of the number of unheard messages in an extension user's
message box are sent from different VPSs, the most recent notification will be displayed.
Whether or not Enhanced QSIG information is transmitted can be set in the TIE table.
When PBXs are connected by PRI23 cards, the card must be set to ISDN Standard mode. If set to T1
mode, the card must be removed and reinstalled to allow the mode to be changed. When the card is
326
Feature Guide
Telephone Company
PBX-2
Private network
Mailbox 201:
"Hello. I am not at
my desk right now."
Extn. 201
Fwd to VPS
Outside Caller
TIE Line Network
PBX-3
PBX-4
PBX-5
PBX-6
PBX-7
PBX-8
Extn.
202

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda200Kx-tda600Kx-tda100

Table of Contents