General Settings - Psm - JVC KW-XG701 Instructions Manual

*
1 When you adjust the bass, mid-range, treble, or loudness, the adjustment you have made is stored for the currently
selected sound mode (iEQ) including "USER."
*
2 If you are using a two-speaker system, set the fader level to "00."
* The adjustment will not affect the subwoofer output.
3
*
4 Depending on the amplifier gain control setting. (See page 29 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table below and on pages 28 and 29.
1
Enter the PSM settings.
2
Select a PSM item.
Indication
DEMO
Display demonstration
SCREEN
Spectrum analyzer
screen
CLK DISP *
1
Clock display
*
1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select "OFF" to
save the car's battery.
Downloaded from Caradio-Manual.com Manuals
Item Setting, [reference page]
( : Initial)
• DEMO ON : Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [4].
• DEMO OFF : Cancels.
METER 1, : You can select the different visual effect display during playback.
METER 2, METER 1 – METER 5: The spectrum analyzer meter changes
METER 3,
METER 4, SAVER 1 – SAVER 2: The spectrum analyzer meter changes the
METER 5,
SAVER 1, OFF:
SAVER 2, OFF
• ON : Clock time is shown on the display at all times when the power is
turned off.
• OFF : Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [4].
3
Select or adjust the selected PSM item.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.
according to the audio input level.
pattern repeatedly.
Cancels.
Continued on the next page
SETTINGS 27