Connecting A Television - Mitsubishi Electric Apricot AL Series Owner's Handbook Manual

CHIPS tab. In the options, click the 'Both'
button to enable operation of two monitors.
5. Click OK to exit Display Properties.
6. Close the Control Panel (File menu).
7. To toggle between the LCD display and the
external monitor, use the <Fn>
To disconnect the external monitor, switch the monitor
off, then shut down the computer, and turn it off.
Note
Make sure that the resolution of the monitor is set to that
of the computer's LCD display before connecting it,
otherwise the display may not appear correctly.
1
This procedure applies to Windows 95, and may be
different for Windows 98. If your computer has
Windows 98 installed, refer to your documentation or
on-line Help.

Connecting a television

1
You can connect a television to your computer. It is
possible to view the display and the television together.
1.


2.
<F3> keys.
3.
4.
5.
6.
OWNER'S HANDBOOK
Enter the Setup utility by pressing the F2 button
when prompted during Startup.
Set the TV Out option in the Main menu to the
correct international standard (NTSC or PAL).
Shut down the computer, and turn it off.
Make sure the television is switched off.
Connect the computer to the composite video
input on the television using on the back of the
computer, as shown in the following diagram.
Switch the computer and the television on.
To toggle between the LCD display and the


television, use the <Fn>
O p t i o n a l d e v i c e s
Composite Video
<F3> keys.
5 / 3