Using Your Soundbar; Turning On The Soundbar - Sanyo FWSB426F Owner's Manual

Turning On the Soundbar

1
Press on the Remote Control.
2
Check that the LED indicator on the rear of the Subwoofer steadily lights up.
• The LED lights up if the Subwoofer is properly connected to the Soundbar.
R R ear of Subwoofer Rear of Subwoofer
If the Soundbar is not Connecting to the Subwoofer:
1. Make sure the Subwoofer is connected to an AC outlet.
2. Press and Hold the CONNECT button on the Rear of the Subwoofer until the Red LED starts blinking rapidly.
3. Using the Remote Control, switch the Soundbar Input to AUX by pressing the AUX button.
4. Press and Hold the
blink together.
• The Soundbar is now attempting to Pair with the Subwoofer. The Red LED on the Rear of the Subwoofer will steadily
light up after the pairing success.
3
Select Input source.
• One of the INPUT indicators will light up when you switch to your Connected Source.
• For Bluetooth connections, refer to "Playing back a music file through Bluetooth" on page 15.
EN

USING YOUR SOUNDBAR

LED
CONNECT button
PAIR button on the Remote Control until the AUX and BLUETOOTH LEDs on the Soundbar
e.g.) When was pressed the OPTICAL INPUT
(Orange LED) was selected. If the
pressed again the COAXIAL INPUT (Green LED)
was selected.
INPUT
OPTICAL/
LINE USB
COAXIAL
– 11 –
was
AUX PAIR