Sony DCR-TRV250 Operating Instructions Manual page 230

Types of trouble and how to correct trouble
Symptom Cause and/or Corrective Action
The picture from a TV or VCR does • DISPLAY is set to V-OUT/LCD in the menu settings.
not appear on the screen even when -> Set ]t to LCD (p. 222).
your camcorder is connected to the
outputs of other equipment
(connected with the A/V cable).*:_l
The melody or beep sounds for five * Moisture condensation has occurred.
seconds. -> Eject the cassette and leave your camcorder for at least
one hour to acclimatize {p. 247).
• Some trouble has occurred in your camcorder.
-> Eject the cassette and insert it again, then operate your
camcorder.
You cannot charge the battery pack. • The POWER switch ]s not set to OFF (CHG).
-> Set it to OFF (CHG).
The BATTERY INFO is not • The POWER switch ]s not set to OFF (CHG).
displayed. -> Set it to OFF (CHG).
• The battery pack is not installed properly.
-> Install it properly (p. 18).
• The battery pack is fully discharged.
-> Install a fully charged battery pack.
No function works though the power -> Disconnect the power cord of the AC Adaptor or
is on. remove the battery, then reconnect it in about one
minute. Turn the power on. If the functions still do not
work, open the LCD panel and press the RESET button
using a sharp-pointed object. (If you press the RESET
button, all the settings including the date and time
return to their defaults.) (p. 258)
You cannot install the USB driver. .5_ • Your camcorder was connected to your computer with the
USB cable before installing the USB driver, so the driver
was not recognized by the computer.
-> Uninstall the unrecognized driver, and then reinstall the
driver (p. 194).
230