Sony DCR-TRV250 Operating Instructions Manual page 97

Dubbing a tape
When you have finished dubbing a tape
Press • on both your camcorder and tile VCR.
Note on tapes that are recorded in the Hi8 Him/standard 8 mm [] system
The picture may fluctuate. This is not a malfunction. Digital signals are output as image
signals from the _, DV jack during playback.
You can connect one VCR only using the i.LINK cable
See page 244 for more information about i.LINK.
Pictures processed by the following functions cannot be output through the L DV
jack:
Digital effect _
Tape PB ZOOM _
Picture effect
If you record paused playback picture with the _, DVjack
The recorded picture becomes rough. Also, when you play back the picture using other
video equipment, the picture may jitter.
When you connect using an i.LINK cable
You cannot dub the titles and display indicators.
g
97