Focusing And Positioning The Screen Image - Acer PL111 User Manual

5 To turn off the projector, press the Power button. A message will
appear on the screen for about 10 seconds:
6 Press the Power button once again (to turn off the power) while
the message is stillshowing on the screen.

Focusing and Positioning the Screen Image

After an image appears on the screen, check
to see if it is in focus and whether it fits
properly on the screen.
•
To adjust the focus of the image, rotate
the focus ring.
•
To adjust the size of the image, rotate
the zoom ring. Zooming in to make the
image larger or zooming out make it
smaller on the screen.
Downloaded From projector-manual.com Acer Manuals
Note: Please wait until the fan motor and the Lamp LED turn off
before removing the power cord from the projector.
Zoom Ring
Focus Ring
Adjuster Button
Note: Push the adjuster button to adjust the projected image
position. Hold down the adjuster button to pull the height
adjustment. Release the adjuster button and the height
adjustment position will be locked.
13