LG LRN8240D Series Owner's Manual page 57

to occurred event recording mode and recording starts
automatically.
NOTE
• Text recording option (T, C+T, S+M+T, C+S+M+T) is not
supported for model LRN8240D.
• [Normal], [Text], [Instant/Panic] for [Schedule Config] is not
supported for model LRN8240D.
3. Select the desired channel to schedule recording.
4. Click the start time cell block and drag & drop to select a time
period cell block.
or
Click the start time cell block of a channel and drag & drop
across the channels to select the time period block for multi-
channel setting at the same time. The color of the cell blocks
will be changed.
Schedule day copy settings
1. Select the source day to copy.
2. Click the [Schedule Copy] button to display the schedule copy
setup window.
3. Select the destination day from the day of the week, weekday or
weekend options.
4. Click the [Copy] button on the Day Copy option to copy the
scheduled data of the day.
Schedule channel copy settings
1. Select the day.
2. Click the [Schedule Copy] button to display the schedule copy
setup window.
3. Select the source channel.
4. Select the destination channel.
5. Click the [Copy] button on the Channel copy option to copy the
scheduled data of the channel.
Schedule Configuration Settings
1. Click the one of the buttons to display the recording setting
window.
2. Set the detail options.
3. Click the [OK] button to confirm the settings.
To add the Special day
1. Mark up the [Special day] option.
2. Click the [Add] button.
3. Enter the name of the special day. You can set the name as
Korean or Japanese.
4. Select the date to set the special day schedule and click the
[Add] button. The special day is added to the list.
5. Mark up the desired recording option.
6. Set the schedule time for each channel(s).
To edit the Special day
1. Select a special day title on the list.
2. Click the [Edit] button.
3. Select the date to change the special day schedule and click the
[Edit] button.
4. Change the schedule time for each channel(s).
To delete the Special day
1. Select a special day title on the list.
2. Click the [Delete] button.
Event Settings
Sensor
1. Click the [Setup] button.
2. Set the below options.
• In: Displays the number of the ALARM-IN terminal.
• Sensor Type: The sensor state can be set to either N.O.
(Normally Open) or N.C. (Normally Closed).
• Camera: Select the camera channel connected to the
ALARM-IN terminal.
• Output: Select the alarm (relay) output number for the
RELAY-OUT terminal for the output alarm (relay) signal.
• Preset: Select the preset number. When the input is
activated, the camera moves to the selected preset position
and the picture of the camera in that position appears on
the monitor.
3. Click the [OK] button to confirm the settings.
LG Network Client Program 57
5