Announcement To All Members Of A Line Group; Team Functions - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
p
Enter the code!
Using HiPath 4000 as a intercommunication system
Announcement to all members of a line
group
Using this function, you can make a simultaneous an-
nouncement to all members (10 to 40) of a line group.
After you have set up the group call, you will receive a
confirmation tone which tells you that you can start your
announcement.
n
Lift the handset.
Enter the system code-number for "announcements"
and
p
the internal call number of a group member.
or
Press the "announcement" key (must be installed)
and
p
enter the internal call number of a group member.
The loudspeakers of all group telephones are automati-
cally activated and you will hear a confirmation tone.
You can now start your announcement..
End your announcement by replacing the handset or
pressing a line key.
If a group member lifts a handset, he or she is connec-
ted to you and the announcement is terminated.
If a group member presses the loudspeaker key or the
relevant line key for the announcement, he or she is dis-
connected from the announcement. If the last remai-
ning member of the group presses the loudspeaker key
or the line key, the announcement is terminated.

Team functions

49