System-Wide Voice-Calling - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
p
Enter the code!
Using HiPath 4000 as a intercommunication system

System-wide voice-calling

From your telephone, you can voice call any internal
user whose telephone has a speakerphone function or
a loudspeaker.
A destination subscriber is voice called via his or her in-
ternal call number.
n
Lift the handset.
Enter the system code number for "voice calling" and
p
the internal call number of the user.
or
Press the "voice calling" key (must be installed before-
hand)
and
p
enter the internal call number of the user.
An immediate connection is made to the destination
loudspeaker if
• there is no busy condition
• the handset has not been lifted
• and voice-calling protection has not be activated
The calling party will hear a confirmation tone indicating
that the connection has been set up and that he or she
can start talking.
The called party can accept the call by lifting the handset.
If the called party presses the loudspeaker key or the
line key (if installed), the connection is aborted.
The number of possible voice calls is the same as
the number of possible normal calls.
47