Type Of Voice Mail; Voice Mail Group; Mailbox Assignment For Auto-Answering Mode - Siemens HiPath 1100 Programming Manual

Step by Step
= Local Area Code (LAC)
3
4 = Country Area Code (CAC)
Initial state for Programming Mode.

Type of Voice Mail

This setting specifies the type of voice mail to be used
by the system.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 1 4
... Select the type of Voice Mail:
1 3
= None (Default)
1
= VMI
2
3 = EVM
Initial state for Programming Mode.

Voice Mail Group

This setting specifies the UCD group to be used by the
system.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 1 5
Enter the UCD Subscriber Group number (790 to 799).
ou
Press this key to delete a specified group.
*
Initial state for Programming Mode.
Mailbox Assignment for Auto-Answer-
ing Mode
This setting assigns mailboxes to a user's extension
slots.
Required: Programming Mode must be active (*95
31994).
EVM Module
163