Siemens HiPath 1100 Programming Manual page 138

Programming a Digital Trunk
Step by Step
, ,
0 1 0 2 0 3
, ,
0 1 0 2 0 3
138
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 6 2
or Enter the S
1 1
1 ... 3 Select an operating mode:
= External line and extension (default)
1
= External line only
2
3 = Extension only
or Enter the next slot for the S
1 1
or
Press this key.
#
Initial state for Programming Mode.
[1] Module slots are: HiPath 1120 (02), HiPath 1150 (03) and HiPath
1190 (01 and 11).
After completing the configuration, the system
must be restarted.
Module slot on the system
0
1
.
module.
0