Using The Edge Blending Features - Hitachi CP-WU5500 User Manual

Using the EDGE BLENDING features

1. MODE (MANUAL)
OFF: Disables the Blending function.
MANUAL: Allows you to adjust Blending Region or Blending Level by using menu.
• IMAGE OPTIMIZER is not selectable when Blending is set to other than OFF.
• ECO MODE is not selectable when Blending is set to other than OFF.
2. BLENDING LEVEL
Select BLENDING LEVEL with ▲/▼ buttons.
[1-25] can be selected with ◄/► buttons.
Adjust the brightness of Blending Region according to the settings.
3. BLENDING REGION
3.1 Specifying Blending Region
Select one of the four sides with ▲/▼/◄/► buttons and press ENTER or
button. Blending Region can be specifi ed for left and right sides with ◄/►
buttons and for top and bottom sides with ▲/▼ buttons.
Specify Blending Region for each projector.
Adjust them referring to the guide displayed during the adjustment of Blending
Region.
* The minimum value of Blending Region is 200 dots.
(continued on next page)
Blend Region
Left Image
Guide line
Right Image
Operating
41