Panasonic KX-NT700 Operating Instructions Manual page 3

Standard Connection Methods
Allow you to make and receive peer to peer IP calls, TEL calls, and PS or PC calls.
Connection to an IP Network
Allows you to make and receive calls over an IP network.
In this document, this connection method is referred to as the "IP line", and calls made using the IP line are
referred to as "IP calls". There are 2 modes for making and receiving IP calls. When using IP-PBX mode, the
unit can make and receive IP calls as a SIP extension of a Panasonic KX-TDE or KX-NCP series PBX (see
page 2), or general PBX. When using peer to peer mode, the unit communicates directly with the other party's
device.
*1 If the IP network contains a firewall, the firewall must be configured appropriately to allow the unit to communicate over the network.
See page 58 for information about the unit's VoIP communication settings.
If the IP network contains a router that supports NAT/NAPT features, it may not be possible for the unit to communicate over the
network.
Consult your system administrator for details.
Connection to an Analog Telephone Network or PBX
Allows you to make and receive traditional phone calls.
In this document, this connection method is referred to as the "TEL line", and calls made using the TEL line
are referred to as "TEL calls".
Connection to a Compatible Panasonic Portable Station
By connecting the unit to a compatible Panasonic Portable Station (PS) using the included PS Cable, you can
use the microphones and speaker of the unit for calls made or received with the PS.
In this document, this connection method is referred to as the "PS line", and calls made using the PS line are
referred to as "PS calls".
Document Version 2011/06
LAN cable
Telephone cord
PS Cable or PC Cable
Other party of call made
USB Cable
(Intranet) and/or PBX
*1
IP Network (Intranet)
TEL Network or PBX
OR
with portable station
Introduction
Other party of IP call
Other party of TEL call
Other party of call made
with computer
Other party of call
made with computer
Operating Instructions 3