Wlan Self Test In Phoenix; Bluetooth Ber Test In Phoenix - Nokia RM-596 Service Manual

7. To run the tests, click Start.

WLAN self test in Phoenix

Prerequisites
A flash adapter (or phone data cable) connected to a PC with Phoenix service software is required.
Steps
1. Place the phone in the flash adapter or connect data cable to phone.
Phoenix service software.
2. Start
3. Choose File → Scan Product.
4. From the Mode drop-down menu, set mode to Local.
5. Choose Testing → Self Tests.
Self Tests window check the following WLAN test:
6. In the
• ST_WLAN_TEST
7. To run the test, click Start.

Bluetooth BER test in Phoenix

Prerequisites
JBT-9, or SB-6 Bluetooth test box (BT-box) is required to perform a BER test. If a BT-box is not available,
Bluetooth functionality can be checked by transferring a file to another Bluetooth phone.
Steps
1. Connect data cable to phone.
Phoenix service software.
2. Start
Page 3 – 64
Figure 15 Bluetooth and FM radio self tests in
COMPANY CONFIDENTIAL
Copyright © 2010 Nokia. All rights reserved.
BB Troubleshooting and Manual Tuning Guide
Phoenix
RM-596
Issue 2