Connecting A Personal Computer - Pioneer PDP-LX6090 Operating Instructions Manual

Using with other equipment

Connecting a personal computer

Use the PC terminals to connect a personal computer.
Note
• The PC input terminals are DDC2B-compatible.
T
W
Rear view
RGB cable
Displaying an image from a personal computer
To watch an image coming from the personal computer, press PC
on the remote control unit or press INPUT on the flat screen TV to
select "PC".
When connecting to a personal computer, the correct input signal
type is automatically detected. If the personal computer image does
not come in clearly, you may need to use Auto Setup menu. See
page 52.
Note
• The PC terminals cannot be used for audiovisual equipment.
Downloaded From TV-Manual.com Manuals
T
W
Stereo
mini jack cable
Personal computer
Computer compatibility chart
Resolution
720 x 400
640 x 480 (VGA)
800 x 600 (SVGA)
1280 x 720
1024 x 768 (XGA)
1360 x 768 (Wide-XGA)
1280 x 1024 (SXGA)
Connecting an amplifier/AV receiver
You can enjoy more powerful sound by connecting such audio
equipment as an amplifier/AV receiver or subwoofer to the flat
screen TV.
T
W
Rear view
This connection is
not required
when connecting
an AV amp
equipped with
the surround
Stereo audio cable
function to a
subwoofer.
AV receiver
Note
• For details, refer to the operation manual for the audio
equipment to be connected.
• Audio signals synchronizing with currently displayed images
are always output to the AUDIO OUT terminals.
• The audio accompanying images shown on the display is
always output to the SUB WOOFER OUT terminal.
• When signals are input from the HDMI terminals, no signals are
output if they are copy guarded.
• While in DTV mode, no signals are output if they are copy
guarded.
Frequency
70 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
T
W
Optical digital cable
Subwoofer
12
61
En