Connecting A Personal Computer; Connecting An Amplifier/Av Receiver - Pioneer Kuro PDP-LX609A Operating Instructions Manual

Using with other equipment

Connecting a personal computer

Use the PC terminals to connect a personal computer.
Note
• The PC input terminals are DDC2B-compatible.
T
W
Rear view
RGB cable
Displaying an image from a personal computer
To watch an image coming from the personal computer, press PC on the remote
control unit or press INPUT on the flat screen TV to select "PC".
When connecting to a personal computer, the correct input signal type is
automatically detected. If the personal computer image does not come in clearly,
you may need to use Auto Setup menu. See page 40.
Note
• The PC terminals cannot be used for audiovisual equipment.
Computer compatibility chart
Resolution
720 x 400
640 x 480 (VGA)
800 x 600 (SVGA)
1280 x 720
1024 x 768 (XGA)
1360 x 768 (Wide-XGA)
1280 x 1024 (SXGA)
T
W
Stereo
mini jack cable
Personal computer
Frequency
70 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz

Connecting an amplifier/AV receiver

You can enjoy more powerful sound by connecting such audio equipment as an
amplifier/AV receiver or subwoofer to the flat screen TV.
T
W
Rear view
This connection is
not required when
connecting an AV
amp equipped
with the surround
Audio cable
function to a sub-
woofer.
Subwoofer
Selecting a digital audio format
Audio signals synchronised with currently displayed images are output to the
AUDIO OUT terminals. However, audio accompanying the images are output to
the SUB WOOFER OUT terminal.
When using the digital audio output terminal (optical), select settings according
to your AV receiver.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "System Setup" (/ then ENTER).
4 Select "Digital Audio Output" (/ then ENTER).
Select "Dolby Digital" (default) or "PCM".
5 Press HOME MENU again to exit the menu.
Note
• For details, refer to the operation manual for the audio equipment to be
connected.
• When signals are input from the HDMI terminals, no signals are output if they
are copy guarded.
• While in DTV mode, no signals are output if they are copy guarded.
T
W
Stereo audio
cable
Optical
digital
cable
AV receiver
12
47
En