Controlling Other Equipment Using The Supplied Remote Control Unit - Pioneer Kuro PDP-LX609A Operating Instructions Manual

Using with other equipment
Controlling other equipment using the supplied
remote control unit
Using the supplied remote control unit, you can control other equipment in
connection: a set-top box (STB), DVD player, HDD/DVD recorder (DVR), BD player
or VCR.
Before using this function, you need to preset the supplied remote control unit
with the manufacture code of the equipment to be controlled. When you then
want to control the equipment, press SELECT on the remote control unit to select
an appropriate mode depending on the equipment; the selection is switched
among TV, STB, DVD/DVR, and VCR. The corresponding mode indicators on the
remote control unit show the currently selected mode.
• When you control a BD player, select the DVD/DVR mode.
Presetting manufacture codes
1 Press SELECT on the remote control unit to select the STB, DVD/DVR, or VCR
mode depending on the equipment.
2 After confirming that the indicator of the previously selected mode goes
off, press and hold SELECT, and then press 1 on the remote control unit.
The corresponding mode indicator flashes.
3 Press 0 to 9 to enter a three-digit manufacture code.
See the manufacture code list to identify an appropriate code.
The mode indicator lights up for approximately one second and then goes off;
presetting the manufacture code is completed.
Note
• If you perform no operation for approximately one minute while a mode
indicator is flashing, the code presetting procedure is quitted.
• If you enter a code not listed in the table, a mode indicator flashes quickly for
approximately one second and then flashes as before.
• To quit the code presetting procedure halfway while a mode indicator is
flashing, you may press SELECT on the remote control unit.
• The factory default manufacture codes for the STB, DVD/DVR, and VCR
modes are "000", "100", and "500" respectively.
Manufacture codes
• You may not be able to control some equipment in the tables partially or
entirely with the supplied remote control unit.
STB
000 PIONEER 1 (factory default)
001 PIONEER 2
002 AONVISION 1
003 CANAL SATELLITE
004 CHANGHONG
005 COSHIP
006 DORACO
007 HILLS
008 HUMAX
009 PBI
010 PACE 1
011 PACE 2
012 QUALI-TV
013 SKY DIGITAL
014 STAR HUB
015 ZINWELL 1
016 ZINWELL 2
017 ZINWELL 3
018 AONVISION 2
DVD
100 PIONEER 1 (factory default)
101 PIONEER 2
102 AKAI
103 DENON
104 HITACHI
105 JVC
106 KENWOOD 1
107 KENWOOD 2
108 PANASONIC 1
109 PANASONIC 2
110 PHILIPS 1
111 PHILIPS 2
112 SAMSUNG
113 SHARP
114 SONY 1
115 SONY 2
116 SONY 3
117 THOMSON
118 TOSHIBA
119 YAMAHA
12
63
En