Pioneer Kuro PDP-LX609A Operating Instructions Manual page 30

08 Setting up
DRE (Dynamic Range Expander) Picture
Emphasises the contrast on images so that the difference between brightness
and darkness becomes more distinct
Selections Off
High
Mid
Low
Black Level
Emphasises dark portion on images so that the difference between brightness
and darkness becomes more distinct
Selections Off
On
ACL (Automatic Contrast Limiter)
Performs such compensation that results in the optimum contrast
characteristics for images
Selections Off
On
Enhancer Mode
Selects processing of the image's high frequency (detailed) areas to find the
right balance between preserving picture detail and eliminating unwanted noise
Selections 1
2
3
Gamma
Adjusts the gamma characteristics (image gradation characteristics) to find the
right balance between contrast and maintaining dark details
Selections 1
2
3
5 Press HOME MENU to exit the menu.
Using Colour Temp
1 Repeat steps 1 to 4 provided for Using PureCinema.
2 Select "Colour Detail" (/ then ENTER).
3 Select "Colour Temp" (/ then ENTER).
4 Select the desired parameter (/ then ENTER).
Colour Temp
Adjusts the colour temperature, resulting in a better white balance
Selections High
Mid-High
Mid
Mid-Low
Low
Manual
30
En
Deactivates DRE Picture
Enhanced DRE Picture
Standard DRE Picture
Moderate DRE Picture
Deactivates Black Level
Activates Black Level
Deactivates ACL
Activates ACL
Selects Hard (SHARPNESS) image
Selects Natural (SHARPNESS) image
Selects Soft (SHARPNESS) image
Delivers uniformly contrast-rich images
Delivers a well balanced image, applying
delicate in-picture contrast enhancement
Delivers an overall slightly brighter image,
revealing more gradation details
Cool white tone
Intermediate tone between High and Mid
Natural tone
Intermediate tone between Mid and Low
Warm white tone
Colour temperature adjusted to your
preference
You may rather want to perform fine adjustment. To do this, select "Manual" first
and then press and hold ENTER for more than three seconds. The manual
adjustment screen appears. Then go to step 5.
5 Select an item to be adjusted (/ then ENTER).
6 Select the desired level (/).
 button
Item
R High Fine adjustment for For weaker red
bright portions
G High For weaker green
B High For weaker blue
R Low Fine adjustment for For weaker red
dark portions
G Low For weaker green
B Low For weaker blue
To perform adjustment for another item, press RETURN, and then repeat steps 5
and 6.
You may press / to immediately change an item to be adjusted.
7 Press HOME MENU to exit the menu.
Using CTI and Colour Space
1 Repeat steps 1 to 2 provided for Using Colour Temp.
2 Select "CTI" or "Colour Space" (/ then ENTER).
3 Select the desired parameter (/ then ENTER).
CTI
Provides images with clearer colour contours. The CTI stands for Colour
Transient Improvement.
Selections Off Deactivates CTI
On Activates CTI
Colour Space
Changes the colour reproduction space
Selections 1 Optimised for vivid, vibrant colour
reproduction
2 Standard colour reproduction
4 Press HOME MENU to exit the menu.
Using Colour Management
1 Repeat steps 1 to 2 provided for Using Colour Temp.
2 Select "Colour Management" (/ then ENTER).
3 Select an item to be adjusted (/ then ENTER).
Colour Management
R
Y
G
C
B
M
4 Select the desired level (/).
 button
For stronger red
For stronger green
For stronger blue
For stronger red
For stronger green
For stronger blue
0
0
0
0
0
0