Sound Adjustments; Treble; Bass; Balance - Pioneer Kuro PDP-LX609A Operating Instructions Manual

08 Setting up
Note
• You cannot adjust any item while on the "Before" screen. A warning message
appears.
• When you switch to another parameter, make sure to change the display from
"Before" to "After" first, otherwise you cannot select "Before". A warning
message appears if you don't.
• If you exit the selection from the "Before" screen, the previous entry is stored
in the memory and the TOOLS button no longer works.
• If you exit the selection from the "After" screen, the new entry is stored in the
memory and the button no longer works.
• If you move and change the "AV Selection" parameter, the new entry in the
current parameter is stored in the memory and the button continues to work.
• You cannot compare images between different parameters on the "AV
Selection" menu ("MOVIE" and "SPORT", for example).
• When you select this function, "Intelligent Mode" for "Pro Adjust" on the
"Picture" menu, and "Room Light Sensor" on the "Option" menu are set to off
and image quality returns to default settings.
• This function is not selectable:
– when "OPTIMUM" is selected for "AV Selection".
– when you select "AV Selection",
– when you select "Yes" or "No" on the confirmation screen for "Reset" from
the "Picture" menu or
– when you select a menu from the PC source

Sound adjustments

You can adjust the sound quality to your preference with the following settings.
Adjust the sound to your preference for the chosen AV Selection option. See AV
Selection on page 28.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "Sound" (/ then ENTER).
4 Select an item to be adjusted (/).
5 Select the desired level (/).

Treble

Bass

Balance

Sound Effect

Reset

AVC

 button
Item
Treble For weaker treble
Bass For weaker bass
Balance Shifts the audio balance to the
left
6 Press HOME MENU again to exit the menu.
Note
• You can adjust the sound for listening with headphones.
• To restore the factory defaults for the "Treble", "Bass", "Balance" and "Sound
Effect" options, press / to select "Reset" in step 4, and then press ENTER.
A confirmation screen appears. Press / to select "Yes", and then press
ENTER.
• You cannot restore the factory default for "AVC".
• Pressing TOOLS while using Home Media Gallery functions also causes the
"Sound" menu to appear (PDP-LX609A/PDP-LX509A only).
32
En
: 0
: 0
: 0
: Off
 button
For stronger treble
For stronger bass
Shifts the audio balance to the
right
Sound Effect
You can select from SRS FOCUS, SRS, SRS TruBass and SRS Definition.
1 Repeat steps 1 to 3 provided for Sound adjustments.
2 Select "Sound Effect" (/ then ENTER).
3 Select "SRS FOCUS", "SRS", "SRS TruBass" or "SRS Definition" (/).
4 Select the desired parameter (/).
TM
SRS FOCUS
Moves sound source direction vertically and makes sound and voice clearly
audible
Selections Off Deactivates SRS FOCUS
Low Moderate SRS FOCUS
Mid Standard SRS FOCUS
High Enhanced SRS FOCUS
®
SRS
Effortlessly produces a three-dimensional sound field
Selections Off Deactivates SRS
Low Moderate SRS
Mid Standard SRS
High Enhanced SRS
®
SRS TruBass
Produces a clear, rich bass tone
Selections Off Deactivates SRS TruBass
Low Moderate SRS TruBass
Mid Standard SRS TruBass
High Enhanced SRS TruBass
®
SRS Definition
Improves midrange quality and clarifies voice and instrument sound
Selections Off Deactivates SRS Definition
Low Moderate SRS Definition
Mid Standard SRS Definition
High Enhanced SRS Definition
5 Press HOME MENU to exit the menu.
Note
TM
• (SRS WOW HD ) denotes a status where SRS FOCUS, SRS,
SRS TruBass and SRS Definition are on.
• You can adjust the sound effect for listening with headphones.
• The effect of this function differs depending on signals.