Run The Home Media Gallery - Pioneer Kuro PDP-LX609A Operating Instructions Manual

12 Using with other equipment
USB flash drive
Digital camera with USB
Mass Storage Class
(PTP also supported)
Flash media via USB adapter
(Multi-card reader)
Note
• Do not use any USB devices other than those specified. Using other devices
can cause a malfunction.
Readable data format
This system reads FAT16, FAT32 or NTFS.
Readable data files
Movie, music, and photo files play with the exception of Digital Rights
Management (WMDRM10) protected files.
Your flat screen TV supports a single USB device at a time. Also, the panel does
not support USB hubs.
This system may not be able to display modified or edited content from a PC or
other equipment.
Your flat screen TV supports the USB Mass Storage Class and PTP devices.
Some digital cameras may require a setup procedure for Mass Storage Class data
transfer. The setup is done on the camera. See the operating instructions
supplied with the digital camera. Depending on the type of your memory card or
camera, some images may fail to display.
Remove a USB device
To remove a USB device, exit the Home Media Gallery first then disconnect the
device.
Be sure to exit the Home Media Gallery screen before removing the USB device.
If you remove the USB device while the Home Media Gallery screen is displayed,
data inside the memory may be damaged.
Do not insert or remove the USB device immediately after the system is switched
On or Off. This action may cause data inside the memory to be damaged.
Pioneer is not liable for any loss or damage to the data inside the USB flash drive.
52
En
Flat screen TV

Run the Home Media Gallery

1 Press HMG.
The Home Media Gallery menu appears on screen.
2 Select "Media Navigator", "USB", "HMG Playlist" or "HMG Setup".
Use the arrow buttons to highlight an option then press ENTER.
To return to the previous screen, press RETURN.
To exit Home Media Gallery, press EXIT or HMG.
Media Navigator
USB
HMG Playlist
HMG Setup
Use the Media Navigator
By selecting Media Navigator, the previously selected server menu automatically
appears on the screen. When only one server is found, the system automatically
connects the server. You can also use the TOOLS Menu to switch to another
server or manually select a server from the Server List. The screen automatically
changes to the Server List if there are no previous servers.
1 Press HMG.
The Home Media Gallery menu appears on screen.
2 Select "Media Navigator".
Use the arrow buttons to highlight an option then press ENTER.
The Server List screen appears depending on the setting. Select a desired server
from the Server List. The file/folder configuration may vary depending on the
server selected.
Movie
Music
Photo
User Files
4
3 Select the desired folder to navigate or file/content to play.
4 Press ENTER to display a subsequent screen.
A subsequent screen appears.
To return to the previous screen, press RETURN.
To exit Home Media Gallery, press EXIT or HMG.
Note
• The Media Navigator launch depends on the option selected in "Auto
Connection" (page 60). The screen displays after selecting a server from the
server list.
Navigate through a USB device's files and folders
Like navigating through media servers, select the specific file from a device on the
USB Device screen to start an appropriate player. For details, follow the steps
below.
1 Press HMG.
The Home Media Gallery menu appears on screen.
2 Select "USB".
Use the arrow buttons to highlight an option then press ENTER.
The USB Device screen appears. Select the device. When using a single directory
device (USB flash drive), the USB Device screen does not appear.
(Sample screen)