Setting The Hdmi Control - Pioneer Kuro PDP-LX609A Operating Instructions Manual

13 Using the HDMI Control
Rear view
HDMI compliant cable
(HDMI cable having
the HDMI mark)
DVD recorder
• After making connections, enter the setting in "Input Setting" for "HDMI
Control Setting". Be sure that the setting is entered in each HDMI input
terminal to which the device is connected.
• Settings in the connected device(s) are also required to use the HDMI Control
functions. For details, see the operation manual that came with the
connected device(s).
• When a recorder is connected, its power is automatically switched on as the
flat screen TV is turned On to help make the recording smoother.
• When the image from a BD/DVD player or DVD recorder connected through
an HDMI Control supported AV system is switched to display on sub screen
in the 2-screen or picture-in-picture mode, the sub screen turns black without
displaying any image.
• For more information on the devices that support the HDMI Control functions,
check the Pioneer Web site (see back cover).

Setting the HDMI Control

Selecting the input terminal
Select the HDMI terminal to which the external device is connected in order to
use the HDMI Control functions.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "Option" (/ then ENTER).
4 Select "HDMI Control Setting" (/ then ENTER).
Input Setting
Power Off Control
Power-On Ready
Hold Sound Status
5 Select "Input Setting" (/ then ENTER).
6 Select "INPUT 4" , "INPUT 5" or "INPUT 6" (/ then ENTER).
Only the device that supports the HDMI Control and is connected through the
selected INPUT terminal is available for the HDMI Control functions.
7 Press HOME MENU again to exit the menu.
70
En
T T
W W
Optical
digital
Stereo audio
cable
cable
AV amp
: Off
: Off
: Off
: Off
Power On Test
Power Off Test
Note
• If you have selected "Off" in step 6, a message "Operations cannot be carried
out. Confirm the HDMI control settings." appears when HDMI CONTROL is
pressed on the remote control unit.
• If you operate an HDMI supported device(s) using an HDMI terminal other
than the terminal selected in "Input Setting", a malfunction may occur. When
connecting to any HDMI terminals other than the terminal selected in "Input
Setting", make sure to enter the settings of the external device(s) so that the
HDMI Control function does not operate.
Selecting the Power Off Control
You can select whether or not the connected device is turned Off when the flat
screen TV is turned Off. (factory default is "On")
1 Repeat steps 1 to 4 in Selecting the input terminal.
2 Select "Power Off Control" (/ then ENTER).
3 Select "On" (/ then ENTER).
4 Press HOME MENU to exit the menu.
Note
• The "Power Off Control" function is valid for the devices connected to any of
HDMI terminals at the rear of the flat screen TV.
Selecting the Power-On Ready
You can select whether or not the flat screen TV is turned On when the connected
Pioneer recorder or player is turned On and images are input to the flat screen TV.
(factory default is "On")
1 Repeat steps 1 to 4 in Selecting the input terminal.
2 Select "Power-On Ready" (/ then ENTER).
3 Select "On" (/ then ENTER).
4 Press HOME MENU to exit the menu.
Selecting the Hold Sound Status
You can select whether or not the sound continues from the connected Pioneer
AV system when the flat screen TV turns On. (factory default is "Off")
1 Repeat steps 1 to 4 in Selecting the input terminal.
2 Select "Hold Sound Status" (/ then ENTER).
3 Select "On" (/ then ENTER).
4 Press HOME MENU to exit the menu.
Note
• To have the sound continue when the flat screen TV turns On, confirm that the
"Switch to TV Sound" option appears on the HDMI Control menu before
turning the flat screen TV Off (see page 71).
Power On/Off Test
You can confirm if the Power On/Off control function is effective between the flat
screen TV and the connected device.
1 Repeat steps 1 to 4 in Selecting the input terminal.
2 Select "Power On Test" or "Power Off Test" (/ then ENTER).
A list containing devices appears when multiple HDMI devices are connected to
the HDMI terminals.
3 Select the desired device (/ then ENTER).
4 Press HOME MENU to exit the menu.
Note
• Devices that can be checked for Power On/Off Test are those connected to
HDMI terminals as set in "Input Setting".
• If the Power On/Off Test fails, check for the connection and setting.