Philips KV-S5055C Service Manual page 91

Fig.9.3.2.3 Error Code
Classifica- Error Code
tion
ST1 ST2
Code
- 00 00
- 0A 00
- 0B 00
U11 11 00
U12 12 00
U13 13 00
U14 14 00
U16 16 00
18
*1 *1
U18 xx
U23 1C 00
U25 1E 00
*2 1F *2
U26 x
U30 20 00
F17 87 x
F18 88 x
F31 95 01
95 02
95 03
F33 97 00
F34 98 00
F35 99 x
F36 9A 00
9A 01
F38 9C 00
9C 01
F42 32 00
F60 50 00
F61 51 00
F62 52 00
F63 53 00
F80 60 00
F81 61 00
61 01
ST3 ST4
00 00 No error
00 00 Stop by clicking "STOP"
00 00 Stop by ADF stop-command
00 00 Paper feed jam (Paper didn't reach the Waiting Sensor.)
00 00 Conveyor jam 1 (Paper didn't reach the Slip Detect Sensor.)
00 00 Conveyor jam 2 (Paper didn't reach the Starting Sensor.)
00 00 Conveyor jam 3 (Paper didn't reach the Exit Sensor.)
00 00 Exit jam (Paper did not pass through the Exit Sensor.)
00 00
Document remains in scanner (
x 00 Double feed error (ST3:0 Feed interval /:3 Ultrasonic)
00 00 Detect document with staples (Double-feed detection)
00 00 Detect document with staples (Bent-paper detection)
*2
( ST2: Bent Sensors' Information)
00 00 ADF Door or Imprinter Door is open.
x 00 SD-RAM error
(ST2:1 SD-RAM error for the front default image /:2 SD-RAM error for the
back default image), (ST3:0 Memory check error /:1 Clock phase error)
00 00 Extension SD-RAM error
(ST2:1 Extension SD-RAM error for the front image /:2 Extension
SD-RAM error for the back image)
00 00 Analog IC (for front side) error
00 00 Analog IC (for back side) error
00 00 Analog IC (for front side) error and Analog IC (for back side) error
00 00 USB IC error
00 00 EEPROM error
00 00
Image processing FPGA/DDR2 error (ST2: 0 FPGA configuration
error /:1 Front DDR2 error /:2 Back DDR2 error)
00 00 Front Gate Array error (Access error)
00 00 Front Gate Array error (Shading RAM error)
00 00 Back Gate Array error (Access error)
00 00 Back Gate Array error (Shading RAM error)
00 00 DFP Home Position error
00 00 Front-side gain adjustment error
00 00 Front-side black level adjustment error
00 00 Back-side gain adjustment error
00 00 Back-side black level adjustment error
00 00 Double Feed Detector error
00 00 Ionizer error (Ionizer ON error)
00 00 Ionizer error (Ionizer OFF error)
Contents
*1
ST2: Sensor Information)
91