Configuring EOS Utility Communication Settings
Select [OK].
3
First, the pairing screen is displayed.
Turn the <5> dial to select [OK].
When you press <0>, the following
message is displayed.
"******" represents the last six digits of
the MAC address of the EOS-1D X
you are connecting.
Users of EOS Utility Ver. 2.14 or
later: Go to step 6.
4
Start the pairing software.
Normally, it is installed in the same
location as EOS Utility.
When the pairing software starts up,
an icon is displayed in the task bar.
When the camera is detected, a
message is displayed.
45