Table of Contents
Advertisement
Parking Brake
Always set the parking brake when you stop the machine or
leave it unattended.
Setting the Parking Brake
1. Push the brake pedal (Fig. 3) down and hold it in the
depressed position.
2. Lift the parking brake lever (Fig. 3) up and gradually
take your foot off of the brake pedal. The brake pedal
should stay in the depressed (locked) position.
Releasing the Parking Brake
1. Push down on the brake pedal (Fig. 3). The parking
brake lever should release.
2. Gradually release the brake pedal.
2
Figure 3
1. Brake pedal
Positioning the Seat
The seat can move forward and backward. Position the seat
where you have the best control of the machine and are
most comfortable.
1. Raise the seat and loosen the adjustment knob (Fig. 4).
2. Move the seat to the desired position and tighten the
knob.
1
1858
2. Parking brake lever
13
Figure 4
1. Adjustment knob
Headlights
Headlights are optional on some models. A dash-mounted
On/Off switch (Fig. 2) controls the headlights. The lights
only shine while the engine is running and the switch is On.
Using the Blade Control (PTO)
The blade control (PTO) engages and disengages power to
the blade(s).
Engaging the Blade(s)
1. Depress the brake pedal to stop the machine.
2. Move the blade control (PTO) to Engaged (Fig. 5).
2
1
Figure 5
1. Disengaged
2. Engaged
1
1862
3
1852
3. Blade control (PTO)
Advertisement
Table of Contents
