Toro 17-44HXLE Wheel Horse 71283 Operator's Manual page 32

Problem
The engine overheats. g
The machine does not drive.
Possible Causes
1. The engine load is excessive.
2. The oil level in the crankcase is
low.
3. The cooling fins and air
passages under the engine
blower housing are plugged.
1. The drive control is in the Push
position.
2. The traction belt is worn, loose,
or broken.
3. The traction belt is off of the
pulley.
32
Corrective Action
1. Reduce the ground speed.
2. Add oil to the crankcase.
3. Remove the obstruction from
the cooling fins and air
passages.
1. Move the drive control to the
Operate position.
2. Contact your Authorized
Service Dealer.
3. Contact your Authorized
Service Dealer.