Safety And Instruction Decals - Toro 30722 Groundsmaster 300 Operator's Manual

Keep your body and hands away from pin hole leaks or
nozzles that eject hydraulic fluid under high pressure.
Use paper or cardboard, not your hands, to search for
leaks. Hydraulic fluid escaping under pressure can have
sufficient force to penetrate the skin and cause serious
injury.
Before disconnecting or performing any work on the
hydraulic system, all pressure in the system must be
relieved by stopping the engine and lowering the cutting
units to the ground.
If the engine must be running to perform a maintenance
adjustment, keep hands, feet, clothing, and any parts of
the body away from the cutting units, attachments, and
any moving parts. Keep everyone away.
Do not overspeed the engine by changing governor
settings. To ensure safety and accuracy, have an
Authorized Toro Distributor check the maximum engine
speed with a tachometer.

Safety and Instruction Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
1. Remove the ignition key and
read the instructions before
servicing or performing
maintenance.
100-6578
1. Warning—hand and arm entanglement.
2. Keep the deck covers in place.
3. Stay away from moving parts.
107-2916 (Model 30722 and 30722TE only)
2. Do not operate the mower
with the deflector up or
removed; keep the deflector
in place.
The engine must be shut off before checking the oil or
adding oil to the crankcase.
Make sure that the mower fuel tank is empty if the
machine is to be stored in excess of 30 days. Do not
store the mower near any open flame or where gasoline
fumes may be ignited by a spark.
Perform only those maintenance instructions described
in this manual. If major repairs are ever needed or if
assistance is desired, contact an Authorized Toro
Distributor.
To make sure of optimum performance and continued
safety certification of the machine, use only genuine
Toro replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
3. Thrown object hazard—keep
bystanders a safe distance
from the machine.
1. Warning—read the operator's manual for further information on
torquing the blade bolt.
5
4. Cutting/dismemberment
hazard of hand or foot,
mower blade—stay away
from moving parts
93-7817