Securing The Traction Unit For Transport - Toro 22303 Operator's Manual

2. Stop the engine.
3. Disengage the quick attach pins by turning them
to the outside.
4. If the attachment uses hydraulics, move the
auxiliary hydraulics lever forward, backward,
and back to neutral to relieve pressure at the
hydraulic couplers.
5. If the attachment uses hydraulics, slide the collar
back on the hydraulic couplers and disconnect
them.
IMPORTANT: Connect the attachment hoses
together to prevent hydraulic system
contamination during storage.
6. Install the protective covers onto the hydraulic
couplers on the traction unit.
7. Start the engine, tilt the mount plate forward,
and back the traction unit away from the
attachment.
Securing the Traction Unit for
Transport
When transporting the traction unit on a trailer,
always use the following procedure:
IMPORTANT: Do not operate or drive the
traction unit on roadways.
1. Lower the loader arms.
2. Stop the engine.
3. Secure the traction unit to the trailer with chains
or straps using the operator platform support
openings to secure the rear of the traction unit
and the loader arms/mount plate to secure the
front of the traction unit.
Operation
25