Maintenance; Recommended Maintenance Schedule - Toro 07252 Operator's Manual

Hide thumbs Also See for 07252:
Table of Contents

Advertisement

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
After First Use
Every 8 Hours
After First 20 Hours
Every 50 Hours
Every 100 Hours
Every 200 Hours
Every 400 Hours or
Yearly
Every 800 Hours or
Yearly
1
More often in dusty, dirty conditions
Important
Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
Check the drive belt tension.
Check the starter belt tension.
Check the engine oil.
Check the engine oil.
Check the tire pressure.
Change the engine oil.
Check the front wheel toe-in at the proper ride height.
Check the battery fluid level.
Check the battery cable connections.
1
Change the engine oil.
Lubricate all grease fittings.
Clean the engine cooling areas.
Inspect the air cleaner filter.
Inspect the brake and parking brake.
Inspect the condition and wear of the tires.
Torque the wheel lug nuts.
Check the front suspension adjustment toe-in and ride height.
Check the spark plug and replace it, if necessary.
Check the operation of the Neutral gear shift position.
Replace the air cleaner filter.
Check the brake cable adjustments.
Inspect the drive belt.
Inspect and adjust the starter belt.
Inspect the fuel lines.
Replace the fuel filter.
Change the transaxle oil.
25
1
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

07252tcWorkman 1100

Table of Contents