Table of Contents
Advertisement
Positioning the Seat
The seat can move forward and backward. Position the seat
where you have the best control of the machine and are most
comfortable.
To adjust, move the lever sideways to unlock seat
g019754
Figure 33
(Figure
Figure 34
Changing the Seat Suspension
The seat is adjustable to provide a smooth and comfortable
ride. Position the seat where you are most comfortable.
To adjust it, turn the knob in front either direction to provide
the best comfort
1
1. Seat suspension knob
Using the Drive Wheel Release
34).
Valves
WARNING
Hands may become entangled in the rotating drive
components below the engine deck, which could
result in serious injury.
Stop the engine, remove the key, and allow all
moving parts to stop before accessing the drive
wheel release valves.
WARNING
The engine and hydraulic drive units can become
very hot. Touching a hot engine or hydraulic drive
units can cause severe burns.
Allow the engine and hydraulic drive units to cool
completely before accessing the drive wheel release
valves.
The drive wheel release valves are located in the back of each
hydraulic drive unit, under the seat.
Note: Make sure the release valves are in the fully horizontal
position when operating the machine or severe damage to the
hydraulic system can occur.
1. Disengage the PTO (blade-control switch) and turn the
ignition key to off. Move the levers to neutral-locked
position and apply parking brake. Remove the key.
27
(Figure
35).
g019768
Figure 35
Advertisement
Table of Contents
