Getting Started - Motorola AC1000 User Manual

1. Getting started

IMPORTANT
Do not place your AC1000 in the bathroom or other humid areas.
Location
You need to place your AC1000 base within 2 metres of the mains power socket and
telephone wall socket so that the cables will reach. The socket-outlet should be installed
near the equipment and should be easily accessible.
Make sure that it is at least 1 metre away from other electrical appliances to avoid
interference. Your AC1000 works by sending radio signals between the cordless audio
conferencing unit and base. The strength of the signal depends on where you place the
base. Placing it as high as possible ensures the best signal.
RANGE
The unit has a range of up to 300 metres outdoors when there is a clear line of sight
between the base and cordless audio conferencing unit. Any obstruction between the
base and cordless audio conferencing unit will reduce the range significantly. With the
base indoors and the cordless audio conferencing unit either indoors or outdoors, the
range will normally be up to 50 metres. Thick concrete and stone walls can severely affect
the range.
SIGNAL STRENGTH
The icon on your cordless audio conferencing unit indicates that you are within range
of the base. When out of range of the base, the icon flashes. If you are on a call, you will
hear a warning beep.
The line will hang up if the cordless audio conferencing unit moves out of range of the
base. Move closer to the base. The cordless audio conferencing unit will automatically
reconnect to the base.
Setting up
IMPORTANT
The base station must be plugged into the mains power at all times. Do not connect the
telephone line cord into the wall socket until the cordless audio conferencing unit is fully
charged. Use only the power adaptor and telephone line cord supplied with the product.
6 Getting started