Stopping The Engine; Starting The Rotor Blades; Stopping The Rotor Blades; Operating Tips - Toro 38518 Operator's Manual

Stopping the Engine

To stop the engine, turn the ignition key counterclockwise
to the Off position (Figure 18).
Figure 18

Starting the Rotor Blades

To start the rotor blades, hold the control bar against the
handle (Figure 19).
Figure 19

Stopping the Rotor Blades

To stop the rotor blades, release the control bar (Figure 20).
Figure 20

Adjusting the Discharge Chute

To adjust the discharge chute, rotate the chute crank and
move the chute deflector handle as shown (Figure 21).
Figure 21
1. Chute handle
Preventing Freeze-up after Use
•
Let the engine run for a few minutes to prevent moving
parts from freezing. Stop the engine, wait for all
moving parts to stop, and remove ice and snow from
the snowthrower.
•
With the engine off, pull the recoil starter handle
several times and push the electric start button once
(if applicable) to prevent the recoil and electric starters
from freezing up.

Operating Tips

The rotor blades can throw stones, toys, and other
foreign objects and cause serious personal injury to
the operator or to bystanders.
•
Keep the area to be cleared free of all objects that
the rotor blades could pick up and throw.
•
Keep all children and pets away from the area
of operation.
•
Remove the snow as soon as possible after it falls.
•
To self-propel, raise the handle and tilt the snowthrower
slightly forward, lifting the wheels off the ground.
The more you tilt the handle forward, the faster the
snowthrower self-propels.
•
If the snowthrower does not propel itself forward on
slippery surfaces or in heavy snow, push forward on
the handle, but allow the snowthrower to work at its
own pace.
•
Overlap each swath to ensure complete snow removal.
10
2. Chute deector handle