Positioning The Seat; Headlights; Positioning The Tilt Steering Wheel; Using The Cruise Control - Toro 72201 Operator's Manual

2
1
Figure 14
1. Lift lever

Positioning the Seat

The seat can move forward and backward. Position the
seat where you have the best control of the machine and
are most comfortable.
1. Raise the seat and loosen the adjustment knobs
(Fig. 15).
2. Slide the seat to the desired position and tighten the
knobs.
1
Figure 15
1. Adjustment knob

Headlights

The headlights are turned on with a separate position,
lights, of the ignition switch (Fig. 16). The lights are on
while the ignition switch is in the lights position even with
the engine off. Remove the key when the machine is left
unattended so lights can not be turned or discharging the
battery.
m–6531
2. Button
m–4982
21
Figure 16
1. Lights
Positioning the Tilt Steering
Wheel
The steering wheel has four tilt locations. Position the
steering wheel where you have the best control of the
machine and are most comfortable.
1. Lift the tilt lever to release the lock (Fig. 17).
2. Move the steering wheel to a comfortable position;
then release the lever to lock.
1
Figure 17
1. Tilt lever

Using the Cruise Control

A three position switch, located on the dash (Fig.18), with
the functions of: Lock–Set (spring loaded), On and
Unlock–Off controls the engagement. Cruise control
maintains the traction control position without foot
pressure. Cruise control is intended for operation in the
forward direction only. Do not use cruise control in
reverse.
1
1208
2
1203b
2. Steering wheel