Vehicle Specifications; Operator Controls - Toro 02740 Operator's Manual

1.23

Vehicle Specifications

0 - 22 km/hr
Travel Speed:
0 - 11 km/hr
Tyres Tyre Type
26 x 12 - 12 4 ply
Front Axle
18 x 9.5 - 8 6 ply
Rear Axle
Wheel Nut Torque Settings:
Service Brakes:
Parking Brake:
Ground Clearance:
Steering:
Features:
Safety Features:

Operator Controls

Steering:
Cylinder Drive:
Engine Speed:
Parking Brake:
Forward and Reverse:
Ignition:
Differential Lock:
Cutterhead Position:
Horn:
Weight Transfer:
SPECIFICATIONS
(0 - 14 mph)
(0 - 7 mph)
Recommended Tyre Pressures
Turf Conditions
0.7 bar
(10 psi)
0.7 bar
(10 psi)
Front Axle 200Nm (148 lbf.ft)
Rear Axle 54Nm (40 lbf.ft)
Closed loop hydrostatic service braking operating on front wheels only
Lever operated oil immersed disc brakes on front wheels only. Pressurised
hydraulic oil release with mechanical override for emergency towing purposes
180mm (7.1˝) at 13mm (.5˝) cut height and with cutterheads raised
Hydrostatic rear wheel steering, emergency manual steering
Tilting operator platform
Lockable engine cover
Adjustable suspension seat with folding arms
Adjustable steering column
Cutterhead parking latches with safety locks
Back lapping facility
Differential lock (selectable)
Engine coolant and hydraulic oil overheat audible warning (horn)
Variable cutterhead weight transfer/traction assistance
2WD. 4WD on demand (forward & reverse)
Hydraulic oil filter blocked telltales on control panel
Neutral start interlock on transmission pump, parking brake and
cutterhead drive switch.
Operator presence control (seat switch).
2 Post folding ROPS designed and tested to European Directive 79/622/EEC.
Automotive padded steering wheel
Electric switch (forward - off - reverse)
Hand lever
Hand lever
Forward and reverse foot pedal
Key start, shut - off and engine preheat
Foot pedal
Hand lever
Button switch
Hand wheel
Forward
Reverse
Road Conditions Max Pressure
1.4 bar 1.7 bar
(20 psi) (25 psi)
1.4 bar 1.7 bar
(20 psi) (25 psi)
1.23