Battery Pack Preparation For Recycling - Toro 51888 Operator's Manual

11. Tighten the chain by turning the tensioning bolt to the right
(Figure 33), until the chain touches the underside of the bar.
12. Tighten the 2 nuts (Figure 32).
13. Check the chain tension. If more tensioning is required,
repeat this procedure starting at 9.
Note: The chain tension is correct when you are able
to use a gloved hand to pull the chain smoothly around
the blade bar
Battery Pack Preparation For
Recycling
WARNING
Upon removal, cover the battery pack's terminals with
heavy-duty adhesive tape. Do not attempt to destroy
or disassemble the battery pack or remove any of its
components. Lithium-ion batteries must be recycled or
disposed of properly at the nearest battery recycling
facility.
Service
Should this item need service, take the product to your Authorized
Toro Service Dealer. Your Toro Dealer is specially trained to repair
Toro products and will ensure that your Toro stays "All" Toro.
Storage
•
When storing or transporting the chain saw, always place the
protective cover over the chain saw blade.
•
Clean all foreign material from the product.
•
Store it in a well-ventilated place that is inaccessible to
children.
•
Keep away from corrosive agents such as garden chemicals
and de-icing salts.
Figure 34
16