Connecting The Phone - Siemens HiPath 3000 Administration Manual

2.2.4

Connecting the Phone

1. Plug the LAN cable into the connector
cable to the LAN/switch. If PoE (Power over Ethernet) is to be used, the PSE (Power Sourc-
ing Equipment) must meet the IEEE 802.3af specification.
For details about the required power supply, see the following table:
Model
OpenStage 15
OpenStage 15 G
OpenStage 20
OpenStage 20 E
OpenStage 20 G
OpenStage 40
OpenStage 40 + 2nd Key Module
OpenStage 40 G
OpenStage 40 G + 2nd Key Module
OpenStage 60/80
OpenStage 60/80 + 2nd Key Module
OpenStage 60/80 G
OpenStage 60/80 G + 2nd Key Module
1 Includes 1 Key Module 15.
2 Includes 1 Key Module.
3 Includes 1 Key Module + USB-Extension with Acoustic Unit.
2. Only if Power over Ethernet (PoE) is NOT supported:
Use only the plug-in power supply unit fitting the OpenStage phone:
7
EU: C39280-Z4-C510
UK: C39280-Z4-C512
USA: C39280-Z4-C511
Plug the power supply unit into the mains. Connect the plug-in power supply unit to the
jack at the bottom of the phone.
3. If applicable, connect the following optional jacks:
• LAN connection to PC
• Headset (accessory)
• Connection to add-on device (accessory)
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual
1
1
2
2
3
3
Assembling and Installing the Phone
at the bottom of the telephone and connect the
Power Consumption/Supply
Power Class 1
Power Class 2
Power Class 1
Power Class 1
Power Class 2
Power Class 2
Power Class 2
Power Class 3
Power Class 3
Power Class 3
Power Class 3
Power Class 3
External power unit required
inbetriebnahme.fm
Startup
2-5