Access The Web Interface (Wbm); Basic Network Configuration - Siemens HiPath 3000 Administration Manual

2.3.1

Access the Web Interface (WBM)

1. Open your web browser (MS Internet Explorer or Firefox) and enter the appropriate URL.
Example: https://192.168.1.15 or https://myphone.phones (firmware V2)
Up to firmware V1R4, unencrypted HTTP can be used for web access. In this
>
case, port 8085 must be added to the phone address or DNS name, for example
http://192.168.1.15:8085
For configuring the phone's DNS name, which is possible which firmware V2, please refer
to section 3.3.6.3, "Terminal Hostname (V2)".
If the browser displays a certificate notification, accept it. The start page of the web inter-
face appears. In the upper right corner, the phone number, the phone's IP address, as well
as the DNS name assigned to the phone are displayed. The left corner contains the user
menu tree.
2. Click on the tab "Administrator Pages". In the dialog box, enter the admin password:
3. The administration menu is displayed in the left column. If you click on an item which is
printed in normal style, the corresponding dialog opens in the center of the page. If you
click on an item printed in bold letters, a sub-menu opens in the right column.
2.3.2

Basic Network Configuration

For basic functionality, DHCP must provide the following parameters:
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual
inbetriebnahme.fm
Startup
Quick Start
2-9