Parking Brake; Hour Meter; Oil Pressure Warning Light; Fuel Gauge - Toro 03206 Operator's Manual

Traction unit
Hide thumbs Also See for 03206:
Table of Contents

Advertisement

Cutting Unit Drive Switch
The switch has two positions: ENGAGE and
DlSENGAGE. Rocker switch operates a solenoid valve, on
valve bank, to drive cutting units.
7
8
10
11
Figure 33
1. Throttle

2. Hour meter

3. Temperature light
4. Oil pressure light
5. Glow plug indicator
6. Alternator light
Hour Meter
Indicates the total hours of machine operation. The Hour
Meter starts to function whenever the key switch is ON.
Engine Coolant Temperature Warning
Light
Light glows if engine coolant temperature is high. If
traction unit is not stopped and coolant temperature rises
another 10_ F., the engine will kill.

Oil Pressure Warning Light

Light glows if engine oil pressure drops below a safe level.
Alternator Light
The amp light should be off when engine is running. If it is
on, the charging system should be checked and repaired as
necessary.
Glow Plug Indicator
Indicator light will glow when glow plugs are operating.
2
3
4
1
5
6
9
7. Cutting unit drive switch
8. Cutting unit shift lever
9. Ignition switch

10. Parking brake

11. Lift lever lock
Parking Brake
Whenever the engine is shut off, the parking brake must be
engaged to prevent accidental movement of the machine.
To engage the parking brake, pull up on lever. Engine will
stop if traction pedal is depressed with parking brake
engaged.
Lift Lever Lock
Move lever rearward to prevent cutting units from
dropping.
Reel Speed Control
(Located under console cover) – To obtain the desired clip
rate (reel speed), rotate reel speed control knob to
appropriate setting for height–of–cut setting and mower
speed. Refer to Selecting Clip Rate section of Manual.
Backlap Control
(Located under console cover) – Rotate knob to R for
backlapping and to F for mowing. Do not change knob
position when reels are rotating.
2
1. Reel speed control

Fuel Gauge

Registers amount of fuel in tank.

Seat Adjustment

Fore and Aft Adjustment — Move lever on side of seat
outward, slide seat to desired position and release lever to
lock seat into position.
25
1
Figure 34
2. Backlap control

Advertisement

Table of Contents
loading

This manual is also suitable for:

03207032200322103200 reelmaster 3100-d

Table of Contents