Maintenance; Recommended Maintenance Schedule - Toro Groundsmaster 228–D Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
After first 10 hours
After first 50 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Every 1000 hours
Maintenance Procedure
Check PTO Belt Tension
Check Fan and Alternator Belt Tension
Change Transmission Filter
Torque Wheel Lug Nuts
Change Engine Oil Filter
Torque Head, Adjust Valves and Check Engine RPM
Check Battery Fluid Level
Lubricate All Grease Fittings
Lubricate Brake Cables
Check Cutting Unit Gear Box Oil Level
Clean Under Cutting Unit Belt Covers
Check Cutting Unit Drive Belt Adjustment
Change Engine Oil
nspect Air Filter, Dust Cup, and Baffle
Change Engine Oil Filter
Check Electric Clutch Gap Adjustment
Check PTO Belt Tension
Check Fan and Alternator Belt Tension
Inspect Cooling System Hoses
Check Rear Wheel Toe–In and Steering Linkage
Change Transmission Filter
Torque Wheel Lug Nuts
Service Air Filter
Drain and Clean Fuel Tank
Change Cutting Unit Gear Box Oil
Change Fuel/Water Separator Filter
Change rear axle lubricant
Coat Transmission Bypass Pins with Grease
Torque Head, Adjust Valves and Check Engine RPM
Replace Moving Hoses
Replace Safety Switches
Coolant System – Flush/Replace Fluid
Replace Hydraulic Oil
29